Stahlflex brake hose set 911/912 to 69 0100-4
Product number: 912-65-0200
Manufacturer: Fischer Stahlflex
Part No. 1: 901 355 632 01
Part No. 2: 695 352 631 00
Manufacturer No. 1: PO0100-4.1
Product information "Stahlflex brake hose set 911/912 to 69 0100-4"
Teflon brake hose set / brake line kit
The set is 4 parts with ABE for the front and rear axles.
Suitable for Porsche 911 and 912 from 1965-1969
Manufacturer Fischer / Germany
Manufacturer Number: PO 0100-4
Steel braided lines offer the following advantages:
* exact pressure point
* excellent dosing
* direct response of your braking system
* Proven 1000 times in racing
* Martenproof
* Incl. TÜV parts certificate
* The original rubber cables from the body to the brake caliper are replaced
Stahlflex brake lines offer several decisive advantages:
The pressure build-up in the brake system that occurs during braking is passed on to the brake calipers immediately and without delay. This shortens the response time of the braking system and thus the braking distance.
The result is very good meterability and a firm pedal feel. Stahlflex brake hoses consist of a hose with Teflon PTFE inner pipe and a V2A stainless steel fabric jacket.
Each individual line is separately pressure tested and approved at 400 bar. This ensures maximum security.
A TÜV parts certificate is included with every brake line set. After installing the Stahlflex brake line set, the entire brake system must be properly vented.
The set is 4 parts with ABE for the front and rear axles.
Suitable for Porsche 911 and 912 from 1965-1969
Manufacturer Fischer / Germany
Manufacturer Number: PO 0100-4
Steel braided lines offer the following advantages:
* exact pressure point
* excellent dosing
* direct response of your braking system
* Proven 1000 times in racing
* Martenproof
* Incl. TÜV parts certificate
* The original rubber cables from the body to the brake caliper are replaced
Stahlflex brake lines offer several decisive advantages:
The pressure build-up in the brake system that occurs during braking is passed on to the brake calipers immediately and without delay. This shortens the response time of the braking system and thus the braking distance.
The result is very good meterability and a firm pedal feel. Stahlflex brake hoses consist of a hose with Teflon PTFE inner pipe and a V2A stainless steel fabric jacket.
Each individual line is separately pressure tested and approved at 400 bar. This ensures maximum security.
A TÜV parts certificate is included with every brake line set. After installing the Stahlflex brake line set, the entire brake system must be properly vented.