Stahlflex brake hose set 997 114-4
Product number: 997-65-0200
Manufacturer: Fischer
Part No. 1: 996 355 139 01
Part No. 2: 996 355 139 00
Manufacturer No. 1: PO114-4.1
Product information "Stahlflex brake hose set 997 114-4"
Teflon brake hose kit / brake line kit
The set is 4 parts with ABE for the front and rear axles
Suitable for Porsche 997 Cayman 997 GT3
Manufacturer Fischer / Germany
Manufacturer number PO 114 - 4
Steel braided lines offer the following advantages:
* exact pressure point
* excellent dosing
* direct response of your braking system
* Proven 1000 times in racing
* Martenproof
* Incl. TÜV parts certificate for easy registration!
* The original rubber cables are replaced
Body to the brake caliper
Stahlflex brake lines offer several decisive advantages:
The pressure build-up in the brake system that occurs during braking is passed on to the brake calipers immediately and without delay. This shortens the response time of the braking system and thus the braking distance.
The result is very good meterability and a firm pedal feel. Stahlflex brake hoses consist of a hose with Teflon PTFE inner pipe and a V2A stainless steel fabric jacket.
Each individual line is separately pressure tested and approved at 400 bar. This ensures maximum security.
A TÜV parts certificate is included with every brake line set. After installing the Stahlflex brake line set, the entire brake system must be properly vented.
It is best to replace the brake fluid completely.
Subsequently, a TüV demonstration is to be carried out in order to have the conversion entered in the vehicle documents using the enclosed certificate.
The set is 4 parts with ABE for the front and rear axles
Suitable for Porsche 997 Cayman 997 GT3
Manufacturer Fischer / Germany
Manufacturer number PO 114 - 4
Steel braided lines offer the following advantages:
* exact pressure point
* excellent dosing
* direct response of your braking system
* Proven 1000 times in racing
* Martenproof
* Incl. TÜV parts certificate for easy registration!
* The original rubber cables are replaced
Body to the brake caliper
Stahlflex brake lines offer several decisive advantages:
The pressure build-up in the brake system that occurs during braking is passed on to the brake calipers immediately and without delay. This shortens the response time of the braking system and thus the braking distance.
The result is very good meterability and a firm pedal feel. Stahlflex brake hoses consist of a hose with Teflon PTFE inner pipe and a V2A stainless steel fabric jacket.
Each individual line is separately pressure tested and approved at 400 bar. This ensures maximum security.
A TÜV parts certificate is included with every brake line set. After installing the Stahlflex brake line set, the entire brake system must be properly vented.
It is best to replace the brake fluid completely.
Subsequently, a TüV demonstration is to be carried out in order to have the conversion entered in the vehicle documents using the enclosed certificate.
Informationen zu Produktsicherheit
Hersteller/EU Verantwortliche Person:
Hersteller/EU Verantwortliche Person: